Tuesday, December 27, 2011

How to Perform an Untethered Jailbreak of Your iPhone 4 Windows 5.0.1




These are instructions on how to perform an untethered jailbreak of your iPhone 4 on 5.0.1 using RedSn0w for Windows. The Mac version of this tutorial is here.

This procedure will cause you to upgrade your baseband potentially ruining your chances for an unlock. Please follow a Windows tutorial on how to update to iOS 5.0.1 using a custom ipsw if you need an unlock.

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

Download the latest version of RedSn0w from here and place it in the Pwnage folder. Likewise, download the 5.0.1 firmware from here and place it in the Pwnage folder. (Note: you do not need to download the 5.0.1 firmware if you are already on iOS 5.0.1)

Extract the RedSn0w zip file by double clicking it.



Step Two: (You can skip this step if iOS 5 is already installed on your device)
Connect your iPhone to the computer and launch iTunes.



Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.


Navigate to the Pwnage folder on your desktop and select the 5.0 firmware ipsw. Click the Choose button to continue.



iTunes will now update your iPhone to the new firmware.

Step Three
Launch the redsn0w application from the redsn0w folder we extracted earlier.



**Windows 7 users may want to try running the redsn0w executable mode as an administrator in Windows Vista compatibility. You can do this by right clicking the executable and selecting Properties from the contextual menu.

Step Four
Once RedSn0w opens click the Jailbreak button




Step Five
Plug your iPhone into the computer and make sure its OFF then click the Next button




Step Six
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here



Hold down both the Home button and the Power button for 10 seconds.



Release the Power button and continue holding the Home button until RedSn0w detects the device.



Step Seven
Your iPhone will now reboot




Step Eight
RedSn0w will now prepare the jailbreak data.



Step Nine
Select Cydia from the list of options and click Next.




Step Ten
Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.



Step Eleven
Once this is complete you will be notified that RedSn0w is done. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.



*As usual a big thanks to the iPhone Dev-Team, Pod2g, and Geohot for their hard work and contribution to the iPhone community.


*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Wednesday, December 21, 2011

Pod2g Demos Untethered iOS 5.0.1 Jailbreak on the iPhone 4




Pod2g has posted a video demonstrating an untethered jailbreak of iOS 5.0.1 on the iPhone 4.

Here is a new video demo of the current status of the 5.0.1 jailbreak running on an iPhone 4. This is meant to reassure people that were thinking it only works on older iPods.

The jailbreak is near ready for prime time (excluding 4S and iPad 2). Patches are the same as redsn0w's. Expect the same level of stability. Some more days to wait. Be patient, we're doing our best.

As usual you can follow us on @limerain_com, Facebook page , and RSS to be notified of any progress updates.



*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Tuesday, December 20, 2011

Pod2g Resolves Cache Troubles With the iPhone 4S Untethered Jailbreak




Pod2g has resolved the cache troubles with the iPhone 4S untethered jailbreak, according to a new progress update.

---
OK, figured it out, the A5 cache is not a problem anymore. I sorted it out by doing the untether in a single thread and by flushing all the dcache then all the icache in a row at a strategical point of the process. It took me like a hundred of tests to find the key. Hard for the nerves.

For the tech guys, here is a link explaining issues related to self modifying code ( or code patching ) on the ARM platform : http://blogs.arm.com/software-enablemen ... ying-code/

Another news : I discussed with @saurik today about the launchd boot process, and he's found one missing piece of the puzzle I needed to have a perfectly stable jailbreak. He's definitly one of the best iOS gurus out there. Thank you saurik!
---

Things are definitely progressing. We'll let you know when we have more news via @limerain_com, Facebook page , and RSS.



*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Monday, December 19, 2011

Update on the Untethered Jailbreak for the iPhone 4S




Pod2g has issued an update on the progress of the untethered jailbreak for the iPhone 4S.

For those who haven't been tracking his progress, last week pod2g successfully untethered the iPhone 4, iPhone 3GS, iPod 4G, iPod 3G, iPad 1, and Apple TV 2 (4.4.3). He has now turned his attention to the iPhone 4S and the iPad 2.

Here are the news of the 4S week-end. The untether fails right now because I'm having processor cache issues. I'm close, but I can't figure out what happens. It certainly has something to do with the Cortex-A9 cache management.

I could sort it out quick, it's a matter of chance. I'll report you my progress tomorrow.

As usual we will keep you up to date with the latest. You can follow Us via @limerain_com, Facebook page , or RSS.



*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Thursday, December 15, 2011

Progress Report on the iOS 5.0.1 Untethered Jailbreak




Pod2g has issued a new progress report on the iOS 5.0.1 untethered jailbreak in which he reveals that the jailbreak for old devices is being packaged for release.

Thanks to donators, pod2g has received enough financial support to purchase an iPhone 4S and iPad 2 and will soon start working on the jailbreak for those devices.

---
Hello my friends,I know that I've been silent yesterday and that it was annoying.

Sorry for this, but I had to organize things for the release.
Also, I've tested iPad 1 and it worked.
Today I hope I can test a 3Gs.

BTW: please don't propose to be a beta tester because I'm too paranoid, fearing leaks.

Now the time to finalize the jailbreak for old devices, fix some stability issues and package the whole.That will take some days.

In the meanwhile, I'm starting the research for iPad 2 and 4S.I'll take you informed of my progress.

Finally, I want to thank all who donated. I now can buy both devices! I don't know what to say.

Thank you very much my friends.
---

Stay tuned to Limerain on @limerain_com, Facebook page , or RSS for news on when the jailbreak will be released.



Early iOS 5.0 Demo Video

*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Wednesday, December 14, 2011

Untethered Jailbreak Completed for iPhone 4/3GS, iPod Touch 4G/3G, iPad 1, ATV 2 iPhone 4s and iPad 2 I in te works


Pod2g has announced the completion of an untethered iOS 5.0.1 jailbreak of the iPhone 4, iPhone 3GS, iPod 4G, iPod 3G, iPad 1, and Apple TV 2 (4.4.3).

Previously, pod2g said that he would work on jailbreaking the iPhone 4S and iPad 2 after finishing the jailbreaks for the above devices.

Tons of questions from my nice followers. Too early to answer. Will work on iOS 5.0.1, will try iPad 2 and 4S after others are ready.

Let's hope he is successful with the iPhone 4S and iPad 2 as well. Stay tuned to Limerain on Twitter, Facebook, or RSS for news on when jailbreak will be released.



*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Monday, December 12, 2011

iPhone 4 Gets Untethered Jailbreak on iOS 5.0.1




Pod2g has announced that he's successfully performed an untethered jailbreak on an iPhone 4 running iOS 5.0.1.

Got an untethered iPhone 4 running iOS 5.0.1. Feel free to update.

Of course, if you want to SIM unlock, don't update using Apple's original FW nor update OTA.

This is great news! We strongly recommend that everyone use iFaith or TinyUmbrella to save their iOS 5.0.1 SHSH Blobs.

You can find instructions on how to do that here: Windows, Mac




*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Friday, December 9, 2011

Pod2g on the Untethered Jailbreak for iOS 5




Pod2g has started a new blog to chronicle his work on the iOS 5 untethered jailbreak he demonstrated earlier today.

Here's the first post:

---
Today I succeed in jailbreaking my iPod 3G. The exploit is user-land, rely on a user ROP payload and a kernel write anywhere exploit.

I can't give much details right now, but here are the next steps :
- upgrade the iPod 3G to iOS 5.0.1
- do the same on iPhone 4 / iOS 5.0.1
- then iPad 1 & iPod 4G

At every step, the exploit code needs certainly to be reworked, but I really don't know right now. Next, I'll return to the research for iPad 2 and iPhone 4S. I don't know if I gonna release first for other devices or not. I've to think about it. Feel free to give your opinion.
---

We'll keep you up to date with news on pod2g's progress.




*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Thursday, November 17, 2011

Unlock Your iPhone 4S Without Jailbreaking?




A new unlock method has surfaced today which claims to work without the need of any software, hardware or jailbreak.

A bug in iOS 5 discovered by Michael Capozzi theoretically allows any iPhone 4S to be unlocked to any GSM carrier. However, Capozzi says he was only able to test with T-Mobile.

We are currently working towards independent confirmation of his method. It does require you to have an active T-Mobile SIM card (with data working). Remember it must be cut to micro-SIM size to fit the iPhone 4S.

The Steps:
● Insert original carrier AT&T SIM card
● Dial 611 for AT&T customer service hotline and drop the call
● Turn on Airplane Mode
● Take out AT&T SIM card
● Insert T-Mobile SIM card
● Make sure WiFi is off ( also tap on 'Forget this Network" to make sure it doesn't connect automatically later)
● Switch off Airplane Mode and iPhone will search for network. This is followed by the Apple splash screen appearing.
● Activation Required will be displayed on the screen
● EDGE network will activate automatically – notice the 'E' on the top left corner of the screen
● Wait for about 20-30 seconds and turn off the phone
● Turn on iPhone and the same Activation Required screen will be displayed
● When you see one signal bar, tap on Use Cellular Connection
● Eject SIM card
● Activation Required screen will be displayed the second time
● Insert SIM card
● Unlocked!

We are getting some confirmation reports. If you are able to test this, please let us know your results. Remember this method may unlock your device; however, it will not last through a reboot. So while not practical for day to day use. It may benefit those traveling abroad.

Update:
Gizmodo is claiming some confirmation as well.


*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Monday, November 7, 2011

Pod2g Discovers Vulnerability That Can Untether the iOS 5 Jailbreak!




Pod2g has announced the discovery of a bug that can untether the iOS 5 jailbreak!

Hey jailbreaking friends, I've found a bug that can untether iOS 5. Don't expect a release soon, but I'm gonna work hard in it.

Pod2g has been behind the discovery of numerous other vulnerabilities including SHAtter.

We'll keep you up to date with pod2g's progress on the untethered jailbreak of iOS 5. You can follow us on Twitter or Facebook for instant notifications.



*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Thursday, October 20, 2011

Quickly View Your Mac's Free Space With This Utility




FreeSpace is a menu bar utility that lets you manage your connected drives.

✔ FreeSpace combines many status bar apps into one
- Eject All by 1-click
- Display free spaces of all connected drives
- Mount and Eject completion indicator

✔ Detail Features
- Eject all external drives and disk images by 1-click or ⌘E
- Display the free spaces of all your connected drives on the menu
- Display the free space of any local drive on the status bar
- Drives are grouped and displayed in their own categories
- Eject any single external drive or disk image
- Open any drive in Finder by clicking the menu
- Drives information are updated in realtime

✔ Ultra Efficient
- Ultra-low CPU and memory consumption
- Ultra-fast auto-launch when login

✔ Language Support
- English, 日本語, 正體中文, 簡體中文

✔ Mac Requirement
- OSX 10.6.8 or above

You can purchase FreeSpace from the App Store for $0.99.










*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Tuesday, October 18, 2011

How to Make Siri Recognize Your Contact Names




These are instructions on how to get Siri to recognize the names of your contacts. This is especially useful for names that are difficult to pronounce or are said different from how they're spelled.

Step One
Launch Contacts from your Springboard or from the MobilePhone app.



Step Two
Select a contact from your address book.



Step Three
Press the Edit button at the top right of your screen.



Step Four
Scroll down and select Add Field from the list of buttons.




Step Five
Choose Phonetic First Name or Phonetic Last Name from the list of possible fields.



Step Six
Enter the phonetic pronunciation of the name that Siri isn't recognizing then press the Done button at the top right of your screen.






NICKNAME
You can also get Siri to recognize and refer to a contact or yourself using an entirely different name by adding a Nickname field to the contact entry.



*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Saturday, October 15, 2011

iOS 5 iPhone 4S GUI PSD Available for Download




Teehan+Lax has made available a Photoshop iOS 5 (iPhone 4S) GUI PSD to help designers create application mockups for the new OS.

One thing to be sure of here is that this OS is tighter from a design standpoint than its ever been before. Apple's passion and attention to detail is something that every designer and developer needs to have. Without it, you're simply not putting your best foot forward. Now, go make epic shit.

You can download the PSD from here.













*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Friday, October 14, 2011

IMDb Buzz Brings Entertainment News to Your iPhone




IMDb Buzz gives you daily updates about your favorite celebs, movies, TV shows to your iPhone or iPod touch.

Get the news that matters to you with our free IMDb Buzz App! Now you can get daily updates about your favorite celebs, movies, TV shows and news sources by creating a news feed tailored to match your interests. Share your favorites via Facebook, Twitter, email and text message.

Daily Entertainment News
* Get up-to-the-minute entertainment news from hundreds of great sources all in one place
* See breaking news stories immediately
* Explore the people and titles mentioned in each story
* Check out the latest images from red carpet events, movies and TV shows
* Browse all the latest news from IMDb's NewsDesk partners and easily visit their websites

Customize & Share
* Follow your favorite celebs, movies, TV shows and news sources to customize the app
* Rank your news feed to get the information you want first
* Share your favorite stories, celebs, titles and images easily via Facebook, Twitter, email and text message

Explore more
* Check out daily celebrity birthdays
* Browse the most popular celebrities, movies and TV shows of the day
* Search IMDb, the world's largest collection of movie, TV and celebrity info, with over 2 million movies and TV shows, plus 4 million c elebrities, actors, actresses, directors and crew members


You can download IMDb Buzz - Entertainment News from the App Store for free.















*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

Thursday, October 13, 2011

How to Hide App Store/iTunes Store Purchases




These are instructions on how to hide App Store or iTunes Store purchases from being shown on the new purchased list introduced by iCloud.

FROM YOUR IPHONE

Step One
Launch the App Store from your Springboard.



Step Two
Press to select the Updates Tab tab then press the Purchased row.



Step Three
Swipe across a purchased item to display the red Hide button. Press the Hide button to remove the app from appearing in your purchased list.






Step Four
To unhide a previously hidden item press to choose the Featured tab, scroll down and press the button labelled with your Apple ID. Then press View Account from the popup menu.







Choose Hidden Purchases from the iTunes in the Cloud heading. Press the Unhide button to make an app visible in the purchased list again.






FROM YOUR IPAD

Step One
Launch the App Store from your Springboard.

Step Two
Press to select the Purchased tab.



Step Three
Swipe across a purchased item to display the red Hide button. Press the Hide button to remove the app from appearing in your purchased list.






Step Four
To unhide a previously hidden item press to choose the Featured tab, scroll down and press the button labelled with your Apple ID. Then press View Account from the popup menu.







Choose Hidden Purchases from the iTunes in the Cloud heading. Press the Unhide button to make an app visible in the purchased list again.







FROM ITUNES/APP STORE

Step One
Launch iTunes by clicking its icon in your dock.



Step Two
Select iTunes Store from the list on the left. Then make sure you are signed in and click the Purchased link from the menu on the right.



Step Three
Locate the purchase you would like to hide and click the (x) at the top left of its icon.



Step Four
To unhide a previously hidden item right click your account name at the top right of the iTunes window and select Account from the menu that appears.



Click the View Hidden Purchases link under the iTunes in the Cloud heading.



Click the Unhide button to make a select app visible in the purchased list again.



FROM MAC APP STORE

Step One
Launch the Mac App Store by clicking its icon in your dock.



Step Two
Ensure you are signed in then click the Purchased tab at the top of the screen.



Step Three
Hover over the purchase you would like to hide and click the (x) that appears.



Step Four
To unhide a previously hidden item click the Featured tab at the top of the window and select Account from the Quick Links menu on the right.




Click the View Hidden Purchases link under the iTunes in the Cloud heading.



Then click the Unhide button to make a select app visible in the purchased list again.




*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4